기술
"QRsetup" lets you easily connect your iOS devices to the AirStation. Just scanning the AirStation's QR code will connect your iOS devices to the AirStation
automatically.
Compatible Android Devices:
Android devices with a functional camera implemented (rear camera with autofocus function).
Compatible Versions:
- Android 2.1 (Eclair)
- Android 2.2 (Froyo)
- Android 2.3 (Gingerbread)
- Android 3.0/3.1/3.2 (Honeycomb)
- Android 4.0 (Ice Cream Sandwich)
- Android 4.1/4.2/4.3 (Jelly Bean)
- Android 4.4 (KitKat)
- Android 5.0/5.1 (Lollipop)
- Android 6.0 (Marshmallow)
- Android 7.0 (Nougat)
Compatible Wireless Access Points:
Buffalo AirStation that is compatible with QRsetup.
Notes:
- Not all AirStation devices are compatible with QRsetup. Only AirStation models with a QR code on the sticker or setup card are compatible with QRsetup.
- If an error occurs, try any of the following suggestions:
1. Reboot your Android device.
2. Move the mobile device closer to the AirStation and try again.
3. Check the AirStation's operation mode. Make sure the switch is on either Auto or Router mode.
4. Change the AirStation's wireless channel.
5. Use another QR code if there are 2 QR codes on the setup card.
6. Initialize the AirStation (all settings will be deleted).
- For 2.4 GHz Users: Your Android device may not be compatible with wireless channels 12 and 13. If so, change the AirStation's wireless channel to any one between
1-11.
- For 5 GHz Users: Your Android device may not be compatible with wireless channels 52-140. If so, change the AirStation's wireless channel to any one between 36-48.
- The AirStation's QR code contains the factory default security settings. If you've changed any AirStation security settings, you won't be able to connect with
QRsetup.
- If you're using an Android 2.x device and you cannot connect to the Internet after using this app for configuration, restart the web browser or reboot your device.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
automatically.
Compatible Android Devices:
Android devices with a functional camera implemented (rear camera with autofocus function).
Compatible Versions:
- Android 2.1 (Eclair)
- Android 2.2 (Froyo)
- Android 2.3 (Gingerbread)
- Android 3.0/3.1/3.2 (Honeycomb)
- Android 4.0 (Ice Cream Sandwich)
- Android 4.1/4.2/4.3 (Jelly Bean)
- Android 4.4 (KitKat)
- Android 5.0/5.1 (Lollipop)
- Android 6.0 (Marshmallow)
- Android 7.0 (Nougat)
Compatible Wireless Access Points:
Buffalo AirStation that is compatible with QRsetup.
Notes:
- Not all AirStation devices are compatible with QRsetup. Only AirStation models with a QR code on the sticker or setup card are compatible with QRsetup.
- If an error occurs, try any of the following suggestions:
1. Reboot your Android device.
2. Move the mobile device closer to the AirStation and try again.
3. Check the AirStation's operation mode. Make sure the switch is on either Auto or Router mode.
4. Change the AirStation's wireless channel.
5. Use another QR code if there are 2 QR codes on the setup card.
6. Initialize the AirStation (all settings will be deleted).
- For 2.4 GHz Users: Your Android device may not be compatible with wireless channels 12 and 13. If so, change the AirStation's wireless channel to any one between
1-11.
- For 5 GHz Users: Your Android device may not be compatible with wireless channels 52-140. If so, change the AirStation's wireless channel to any one between 36-48.
- The AirStation's QR code contains the factory default security settings. If you've changed any AirStation security settings, you won't be able to connect with
QRsetup.
- If you're using an Android 2.x device and you cannot connect to the Internet after using this app for configuration, restart the web browser or reboot your device.
QR Code is a registered trademark of DENSO WAVE INCORPORATED.
이전 버전
- 01/16/2018: QRsetup 1.6
- Report a new version
- 앱 이름: QRsetup
- 종류: 도구
- 앱코드: jp.buffalo.aoss.qrsetup
- 버전: 1.6
- 요구 사항: 2.1.x이상
- 파일 크기 : 1.41 MB
- 업데이트: 2018-01-16
