FlareCON™ 2.0.3 [free]

The FlareCON™ app runs on Android™ to control any CHAUVET® DJ Freedom™ or D-Fi™ receiver as well as any other LED static wash light from your smartphone or tablet (additional
hardware required). The Wi-Fi™ signal is generated from the FlareCON™ Air hardware interface and no other Wi-Fi™ signals are needed.
The FlareCON™ app sends out 6 color commands - red, green, blue, amber, white and ultraviolet, using the following DMX channel assignments:
•Channel 1: Red (R)
•Channel 2: Green (G)
•Channel 3: Blue (B)
•Channel 4: Amber (A)
•Channel 5: White (W)
•Channel 6: Ultraviolet (UV)
Please note that lights using different channel assignments other than the one specified above will not work properly with FlareCON™ or the FlareCON™ Air hardware
interface.
CHAUVET® DJ static LED wash lights that are DMX-controllable but not D-Fi™-ready can still be controlled via the FlareCON™ Air with the addition of a D-Fi™ hub
https://www.chauvetdj.com/products/d-fi-hub/.
For additional information about the FlareCON™ Air hardware interface, please visit https://www.chauvetdj.com/products/flarecon-air/.

• 09/27/2022: FlareCON™ 2.0.3
• Report a new version